اینورتر ال اس LS (ال جیLG) مدل iC5
اینورتر کوچک با گشتاور بالا Sensorless vector controlاینورتر LS ال اس (ال جیLG) مدل iC5 / اینورتر کوچک با گشتاور بالا
تک فاز با ولتاژ230-200V وتوان 0.4~2.2KW
-
قابلیت اندازه گیری پارامتر های متر بصورت اتوماتیک
-
کنترل به روش V/fو Sensor less vector control
-
دارای گشتاور 150% در فرکانس 0.5 Hz
-
دامنه تغیرات فرکانس خروجی 0.1~400
-
دامنه تغیرات فرکانس حامل 1~15KHz
-
دارای ورودی انا لوگ 0~10Vdc
-
دارای درجه حفاظتی IP20
-
امکان افزایش گشتاور راه اندازی بصورت دستی یا اتوماتیک
-
قابلیت انتخاب سیگنال کنترلی ورودی بصورت NPN/PNP
-
قابلیت مانیتورینگ و کنترل اینورتر از طریق کامپیوتر به کمک نرم افزار Drive view
-
دارای پورتکل ارتباطی Modbus RTU (کارت اختیاری )
-
دارای 8 ورودی / خروجی قابل برنامه ریزی
-
دارای پتانسیو متر جهت کنترل فرکانس بصورت Built-in
-
قابلیت کپی کردن پارامتر ها
-
قابلیت نمایش 5 خطای آخر
-
دارای PID کنتلر پیشرفته
Specification – 1Phase 200V, 0.1 -2.2 KW (مشخصات فنی- تکفاز 200 ولت)
Type |
SV004 iC5-1 |
SV008 iC5-1 |
SV015 iC5-1 |
SV022 iC5-1 |
||
200V Class |
Motor Rating |
[HP] |
0.5 |
1 |
2 |
3 |
[kW] |
0.4 |
0.75 |
1.5 |
2.2 |
||
Output ratings |
Capacity[kVA] |
0.95 |
0.95 |
3.0 |
4.5 |
|
FLA[A] |
2.5 |
0.95 |
3.0 |
4.5 |
||
Output frequency |
0 ~ 400Hz |
|||||
Output voltage |
3 Phasde200~230V |
|||||
Input ratings |
Voltage |
Single phase 200 ~ 230 V (±10%) |
||||
FLA[A] |
5.5 |
9.2 |
16 |
21.6 |
||
Frequency |
50 ~ 60 Hz (± 5%) |
|||||
Control |
Control method |
V/F control, Sersorless vector control |
||||
Frequency setting resolution |
Digital reference: 0.01Hz Analog referency: 0.06Hz/60Hz |
|||||
Frequency setting resolution |
Digital reference: 0.01Hz Analog referency: 0.06Hz/60Hz |
|||||
V/F ratio |
Linear, Square pattern, User V/F |
|||||
Overload capacity |
1 min at 150%, 30 sec at 200% (with inverse characteristic) |
|||||
Torque boost |
Manual torque boost (0~15 adjustable), auto torque boost |
|||||
Input signal |
Operation method |
Keypad / Terminal / Communications |
||||
Frequency setting |
Analog: 0~10V / 4~20mA, Digital: Keypad, Communication: RS485 (Option) |
|||||
Start signal |
Forward, Reverse |
|||||
Multi-step accel/decal time |
0.1~6000 sec. Max. 8 types available by multi-function terminal, Selectable accel/decel patterns : Linear, U and S |
|||||
Emergency stop |
Interrupting the output of the drive. |
|||||
Jog |
Jog operation |
|||||
Fault reset |
Reset the fault when protective function is active |
|||||
Output signal |
Operation status & fault output |
Frequency detection, Overload alarm, Stalling, Overvoltage, Undervoltage, Drive overheating, Run, Stop, Constant speed, Speed searching, Fault output ( Relay and Open collector output ) |
||||
Indicator |
Choose one from output frequency, current, voltage and DC voltage.(Output voltage : 0~10V ) |
|||||
Operation function |
DC braking, Frequency limit, Frequency jump, Second function, Slip compensation, Reversing prevention, Auto restart, PID control |
|||||
Protection functions |
Drive trip |
Overvoltage, Undervoltage, Overcurrent, Drive overtemperature, Motor overtemperature, I/O phase loss, I/O mis-wiring, Overload , External device fault 1.2, Loss of speed command, Hardware fault, Communication error, CPU error |
||||
Drive alarm |
Stall prevention, Overload alarm |
|||||
Momentary power loss |
Less than 15 msec: keeping operation More than 15 msec: auto restart available |
|||||
Display Keypad |
Operation information |
Output frequency, current and voltage, Set frequency value, Operation speed, DC voltage |
||||
Trip information |
Display the trip cause when the protection function activates. Recent 5 faults records stored |
|||||
Environment |
Ambient temperature |
-10 ~ 40℃ |
||||
Storage temperature |
-20 ~ 65℃ |
|||||
Humidity |
90 %RH max (No condensing) |
|||||
Atmosphere |
No corrosive gas, flammable gas, oil mist or dust |
|||||
Pressure |
70 ~ 106k Pa |