انتخاب برگه

اینورتر ال اس LS (ال جیLG) مدل iC5

اینورتر کوچک با گشتاور بالا Sensorless vector control

3

دانلود کاتالوگ

اینورتر LS ال اس (ال جیLG) مدل iC5 / اینورتر کوچک با گشتاور بالا

تک فاز با ولتاژ230-200V وتوان 0.4~2.2KW

  • قابلیت اندازه گیری پارامتر های متر بصورت اتوماتیک

  • کنترل به روش V/fو Sensor less vector control

  • دارای گشتاور 150% در فرکانس 0.5 Hz

  • دامنه تغیرات فرکانس خروجی 0.1~400

  • دامنه تغیرات فرکانس حامل 1~15KHz

  • دارای ورودی انا لوگ 0~10Vdc

  • دارای درجه حفاظتی IP20

  • امکان افزایش گشتاور راه اندازی بصورت دستی یا اتوماتیک

  • قابلیت انتخاب سیگنال کنترلی ورودی بصورت NPN/PNP

  •  قابلیت مانیتورینگ و کنترل اینورتر از طریق کامپیوتر به کمک نرم افزار Drive view

  • دارای پورتکل ارتباطی Modbus RTU (کارت اختیاری )

  • دارای 8 ورودی / خروجی قابل برنامه ریزی

  • دارای پتانسیو متر جهت کنترل فرکانس بصورت Built-in

  • قابلیت کپی کردن پارامتر ها 

  • قابلیت نمایش 5 خطای آخر

  •  دارای PID کنتلر پیشرفته

Specification – 1Phase 200V, 0.1 -2.2 KW (مشخصات فنی- تکفاز 200 ولت)

Type

SV004 iC5-1

SV008 iC5-1

SV015 iC5-1

SV022 iC5-1

200V Class

Motor Rating

[HP]

0.5

1

2

3

[kW]

0.4

0.75

1.5

2.2

Output ratings

Capacity[kVA]

0.95

0.95

3.0

4.5

FLA[A]

2.5

0.95

3.0

4.5

Output frequency

0 ~ 400Hz

Output voltage

3 Phasde200~230V

Input ratings

Voltage

Single phase 200 ~ 230 V (±10%)

FLA[A]

5.5

9.2

16

21.6

Frequency

50 ~ 60 Hz (± 5%)

Control

Control method

V/F control, Sersorless vector control

Frequency setting resolution

Digital reference: 0.01Hz

Analog referency: 0.06Hz/60Hz

Frequency setting resolution

Digital reference: 0.01Hz

Analog referency: 0.06Hz/60Hz

V/F ratio

Linear, Square pattern, User V/F

Overload capacity

1 min at 150%, 30 sec at 200% (with inverse characteristic)

Torque boost

Manual torque boost (0~15 adjustable), auto torque boost

Input signal

Operation method

Keypad / Terminal / Communications

Frequency setting

Analog: 0~10V / 4~20mA, Digital: Keypad,

Communication: RS485 (Option)

Start signal

Forward, Reverse

Multi-step accel/decal time

0.1~6000 sec. Max. 8 types available by multi-function terminal, Selectable accel/decel patterns : Linear, U and S

Emergency stop

Interrupting the output of the drive.

Jog

Jog operation

Fault reset

Reset the fault when protective function is active

Output signal

Operation status & fault output

Frequency detection, Overload alarm, Stalling, Overvoltage, Undervoltage, Drive overheating, Run, Stop, Constant speed, Speed searching, Fault output ( Relay and Open collector output )

Indicator

Choose one from output frequency, current, voltage and DC voltage.(Output voltage : 0~10V )

Operation function

DC braking, Frequency limit, Frequency jump, Second function, Slip compensation, Reversing prevention, Auto restart, PID control

Protection functions

Drive trip

Overvoltage, Undervoltage, Overcurrent, Drive overtemperature, Motor overtemperature, I/O phase loss, I/O mis-wiring, Overload , External device fault 1.2, Loss of speed command, Hardware fault, Communication error, CPU error

Drive alarm

Stall prevention, Overload alarm

Momentary power loss

Less than 15 msec: keeping operation

More than 15 msec: auto restart available

Display Keypad

Operation information

Output frequency, current and voltage, Set frequency value, Operation speed, DC voltage

Trip information

Display the trip cause when the protection function activates. Recent 5 faults records stored

Environment

Ambient temperature

-10 ~ 40℃

Storage temperature

-20 ~ 65℃

Humidity

90 %RH max (No condensing)

Atmosphere

No corrosive gas, flammable gas, oil mist or dust

Pressure

70 ~ 106k Pa